What is Procedure for Landing Permit in India?

landing permit

What is Procedure for Landing Permit in India?

Today, the permit process in India is complex and lengthy; however the good news is that this region is evolving as an essential, business aviation-friendly operating environment.

With proper pre-trip planning, a trip to India can be a simple and rewarding experience for many people and crew members.

  1. Make sure your permit request is submitted with required lead time:

One of the biggest challenges in India is the official requirement of time required to get permits.

For overflight permits, the requirement is 3 working days, whereas for landing permits, it is 7 working days. If your permit application is not complete, it can be rejected.

Permits for India take a longer time to process compared to the time in many other countries.

But there’s a reason for that i.e. internally it generally takes the full seven days to go through all the paperwork and then circulate it among the various agencies & departments.

It also needs to be mentioned that the maximum length of stay for a foreign-registered aircraft in India is fourteen days.

If you’re planning on staying longer, you’ll have to depart the country with the aircraft on the day.

  1. Take additional steps for military airfield Prior Permission Required (PPR) requests:

All military airports, including the popular Agra airport, need 30 days’ notice for landing and PPR clearance. However until thirty days before departure, don’t leave your permit request.

You’ve to initiate the permit process at least forty five days in advance. Additional paperwork is needed for both passengers and crew. This process can also be extensive.

Any flight to a military airport delayed by more than one hour from approved timing needs fresh clearance.

  1. Understand the effect of your departure point:

In India, the origin of a flight is a more important consideration for the permit process than whether you are operating privately or as a charter.

Passengers can be boarded at any destination point where the aircraft is cleared to operate.

You must give the same documentation as an Indian-registered aircraft coming in from an international destination.

If you operate privately, then also it doesn’t make a significant difference to the permit process.

There’re generally no problems picking up Indian nationals and flying them within the country.

  1. Say goodbye to surety bonds:

Surety bonds for operating a foreign-registered corporate aircraft have become outdated. So please ignore the surety bonds.

  1. Know your insurance requirements:

There’re no special insurance requirements in place when landing at Indian airports.

Standard worldwide insurance with war-risk clauses and appropriate third party legal liability is enough for operations to India.

 

  1. Be aware of airport slots:

Crews need to be very careful while flying to India during peak hours. Some airports in India have airport slot requirements. These slots are defined in the permit process.

For General Aviation, there may be airport slot closures due to airline activity. You may’ve to change your airport slot close to day of operation.

During busy periods, Air Traffic Control (ATC) can give you delays by as much as 1 to 2 hours.

If you want to make a significant change to an airport slot, then it becomes necessary to start the permit process again.

Parking slots are typically issued 2 hours prior to landing. So you should depart early. Based on the availability, airport slots can be adjusted.

  1. Know India’s tolerances for permit changes:

If you want to make a change to flight time or routing, you will have to revise your permit and give 3 business days’ notice.

Your ground handler may use local professional relationships within India to speed up change requests.

If your aircraft is Aircraft on Ground i.e. (AOG), then it is possible to transfer your permit to another aircraft flying the same schedule.

If you just need to change a routing or destination, then it may require a new permit application.

If your flight is planned to Delhi and you wish to fly to Mumbai at the last minute, then this’ll not be approved, and you will need to reapply for a permit that may result in delays.

  1. Be prepared to pay cash for permits:

Fees and landing permit costs usually depend upon the Maximum Takeoff Weight of the aircraft.

Landing permits and clearances should be settled on arrival either by demand draft or cash. There is no other form of credit available.

Even overflight permits should be settled in cash or demand draft. It is very important to have credit established in advance by a qualified support provider.

  1. Know your destination requirements:

You have to understand your destination requirements.

Your service provider agent will make sure that all ground handling and documentation are in place for the day of planned operation.

You may be able to land at a civilian airport with thousand feet of visibility but a controller at a military airfield can tell you not to land if visibility is below two thousand feet.

  1. Confirm your parking in advance:

Parking availability is usually good at major airports, mainly at the new Bangalore airport.

However, parking issues may occur at Mumbai Airport. Hangar availability varies from airport to airport. So you need to confirm your parking in advance.

Conclusion:

India has different challenges and opportunities compared to other locations in Asia. As a country, India is very focused on aviation and has plans to build more airports.

About Author:

Our main motive is to provide exclusive Air Charter services for seamless operations throughout India.

Vision Aviation Global obtain landing permit and overfly permits from Civil Aviation Authorities in Delhi, India.

We provide unmatched support for flight operations and ground handling services through authorized ground handlers.

 

No Comments

Post A Comment